If you're seeing this message, it means we're having trouble loading external resources on our website.

Jeżeli jesteś za filtrem sieci web, prosimy, upewnij się, że domeny ***.kastatic.org** i ***.kasandbox.org** są odblokowane.

Główna zawartość

Aktualny czas:0:00Całkowity czas trwania:9:21

- [Voiceover] Let's see how to plot data for a first-order reaction, so the conversion of
cyclopropane into propene is a first-order reaction, and in part A they want us to use the experimental data to
show that it's first-order, so we look at the data over here, and we can see as time increases, right, the concentration of
cyclopropane decreases, which makes sense because cyclopropane is turning into propene. If we want to prove that
this is first-order, we need to use the integrated rate law from the previous video, so in the previous video we showed that the natural log of the concentration of A is equal to negative K T plus the natural log of the
initial concentration of A, and for this reaction A is cyclopropane, so we could write this as the natural log of the concentration of
cycolopropane, C three H six, is equal to negative K T plus the natural log of the initial concentration of cyclopropane, which we also talked about
in the previous video follows the form Y is equal to M X plus B, so if we put the natural log of the concentration of
cyclopropane on the Y axis, and we put time on the X axis, if we do that, and we get a straight line, or close to a straight line, then we know that the
reaction is first-order, and the slope of that line, right, M, should be equal to negative K where K is your rate constant, and the Y intercept, right, should be equal to the natural log of the initial concentration
of cyclopropane, so if we're going to
graph that, all right, we need to figure out the natural log of the concentration
of cyclopropane, right? So right now we have only the
concentration of cyclopropane, we need to take the natural
log of all of these numbers, and before we graph something, right? So we need to take the natural log of point zero nine nine, so we get out the calculator here, so natural log of point zero nine nine gives us negative two point three one, so we put negative two
point three one here. Next the natural log of
point zero seven nine, so the natural log of
point zero seven nine, and we get negative two point five four, so negative two point five four. Next, natural log of point zero six five, so the natural log of point zero six five gives us negative two point seven three, so this is negative two point seven three, and then one more, so the natural log of
point zero five four. Natural log of zero five four is equal to negative two point nine two, so we have negative two point nine two, and so now we're going
to do the natural log of the concentration of
cyclopropane on the Y axis, right? And we're going to time on the X axis, so let's go down here and look. I already have the axises labled, right? So on the X axis, all right, down here we have time, and on the Y axis we have the natural log of the concentration of cyclopropane, so let's figure out some points, let's figure out some
points here on our graph, so when time is equal to zero, all right? Y is equal to negative
two point three one, so when time is equal to zero we have negative two point three one. This is negative two, so this
is negative two point one, negative two point two, and so this would be
negative two point three, so negative two point three one would be pretty close to there, and, obviously, it's bery
hard to graph something perfectly given what we're
trying to do here on this video, so I'll just say that's
approximately two point three one. Next point is that when
time is equal to 300 seconds we have Y is equal to
negative two point five four, so 300 seconds would be here. Two point five four, that's
pretty close to here, all right? So we'll say that that's
approximately that point. Next, time is equal to 600 seconds. Negative point two seven three, so we have 600 seconds. Two point seven three. This would be negative two point six, negative two point seven, so negative two point seven three... Close to there, all right? Certainly not perfect, but close enough, all right? And then finally time
is equal to 900 seconds. Negative two point nine two, so 900 seconds, negative
two point nine two would be pretty close to there. All right, so let's see if we can draw a straight line through those points, or pretty close to being
through those points here, so we're putting a line
of best fit, right? Let's see what we can do. Well, that looks pretty
good, actually, all right, so we put our line, and our line is pretty close
to passing through our points, so the points fall on our straight line, so we can say that the reaction is first-order, all right? So this reaction is first-order, and we plotted everything, and we got Y is equal to M X plus B, so we're done with part A because we got a straight
line here, all right? We can say that this is
a first-order reaction. All right, for part B,
our job is to calculate the value of the rate constant, and the rate constant, remember, let's go back up here. The rate constant is K, and we know the slope is M, all right? So the slope of that line is M, and the slope is equal to negative K, so let's go back down to here, so the slope of this line, the slope of this line is equal to negative K, so we can find the slope
a few different ways. One way would be to do delta
Y over delta X, all right? So your slope is equal to
change in Y over change in X, so if you picked a point here, and you picked a point here, all right? You could figure out your
slope that way, all right? So I'm just showing you
what the slope would be. This would be delta Y right here, and then this would be a delta X. Your units would be one
over seconds, right? So your units for K are
going be one over seconds, and we could have figured
out the units a different way by using the rate law, all right? So this is for writing the
rate law for our reaction. The rate of our reaction is
equal to the rate constant K times the concentration of
cyclopropane to the first power because this is a first-order
reaction, all right? So the rate of a reaction
would be in molar per second, and so this would be times K, and then we have the
concentration would be a molar. This is to the first power, so, obviously, molars would cancel, and you would get K is
equal to one over seconds, so however you want to think about it. The units for K will be one over seconds. All right, so we could
figure out some points and calculate K, but we wouldn't get super
accurate value for K using this graph, which
we just plotted by hand, so let's go ahead and
get out the calculator, and let's find out what K is using the calculator, all right? So we can plug in our points. This isn't the calculator
I'm used to using, so it's actually a
little bit more difficult on this calculator than
the one I usually use, but we can do it. We can go to Stats, and then go to F two for Edit, and then hit enter twice, and then we can start putting
in our data points, all right? So when X is equal to zero, all right, Y is equal to negative two
point three one, right? Next, when time is equal to 300 seconds, when X is equal to 300, Y is equal to negative
two point five four. When time is equal to 600, Y is equal to negative
two point seven three, and then, finally, one more point. When time is equal to 900, Y is equal negative two point nine two, so we have all of our data in there now. We can exit, we can go back into Stats, and then hit F one for Calc, all right? So that's what we want. Hit enter twice, and then
we want a linear regression, so that's right here. We want a linear regression, so we hit F two, and B, all right, B is M. B is the slope, so the slope of that line
is negative six point seven times ten to the negative four, all right? So let's go ahead and put that in here. The slope is negative six point seven times ten to the negative four, and that's equal to negative K, so obviously K, or the rate constant, K is equal to six point seven times ten to the negative four, and this would be over seconds, all right? So we've now figured out the
rate constant, all right? So we've proved that this is a first-order reaction, all right, by graphing our data, and then we found the
value of the rate constant by finding the slope of our best fit line.