Główna zawartość
Aktualny czas:0:00Całkowity czas trwania:12:32

Entropy: Embrace the chaos

Transkrypcja filmu video

- Life is chaos, the whole universe is chaos, whether it's the terrible state of my office or the slow degradation of my body into dust, the universe tends toward disorder. But why, why is the universe structured in this terrible and callous way? Well it turns out it's not really the universe's fault. If you think about it, there's only one way, or at best maybe a few ways for things to be arranged in an organized way. But there are nearly infinite other ways for those same things to be arranged. Simple rules of probability dictate that it's much more likely for stuff, whether it's the stuff on my desk or the particles and energy that make up my concept of self, to be in one of the many disorganized states then in one of the few organized states. It's simple math and it's unavoidable. So unavoidable that it is in fact, our second law of thermodynamics which says that any spontaneous process increases the disorder or randomness of the universe. Processes that don't increase the disorder of the universe require work to be done in opposition to the disorder and are in fact, often impossible to achieve. The very act of putting one system in order requires that other systems become disordered. Think of it this way. Your lunch was composed of an extremely ordered set of molecules and it gave you the energy to clean up your house maybe, and it had to be broken down into less ordered nutrient molecules for you to do that. Carbohydrates, proteins and lipids and those molecules were broken down even further as they were converted to energy in your cells and then your body used some of that energy to power your muscles as you cleaned your house. But much of that energy was used to do things like keep your heart beating and breathe and make sweat and some of that was lost to the surroundings in the form of random movement and most importantly, heat. By the time you're finished, your house maybe orderly but the remains of your lunch molecules are all over the place and that's only one of the many systems that became less orderly while you worked. So yes, cleaning your house in fact, increased the overall disorder of the universe. Next time someone gives you a hard time about the state of your house, you can tell them that. Obviously, disorder is a pretty big deal in the universe and that makes it a pretty big deal in chemistry. So scientists have a special name for it, entropy. Entropy is a measure of molecular randomness or disorder. And even though people complain about the disorder in their lives, it's not all bad news. Entropy helps make chemical reactions possible and it helps us predict how much useful work can be extracted from a reaction. We all have to live with disorder, so you might as well understand it. For the next 10 minutes, I want you to embrace the chaos. (upbeat music) So what does the second law of thermodynamics mean when it says any spontaneous process increases the disorder of the universe? Spontaneous simply means a process that doesn't need outside energy to keep it going. And it goes the other way too. Anything that increases the disorder of the universe happens spontaneously, that doesn't mean disorderly things will always happen though. Other factors may interfere. The reaction to change a diamond into graphite for example, would be thermodynamically spontaneous. It wouldn't have to be forced along by outside energy. But the bonds in the diamond are so stable that essentially, it never gets started. Lots of other chemical reactions are like this too. So even though we sometimes think of spontaneous as meaning sudden and impulsive like the majority of mall lip piercings and chemistry spontaneous doesn't tell you how quickly something happens. It only means a reaction is thermodynamically capable of happening without outside energy to move it along. Though come to think of it, I imagine that spontaneous lip piercings cause a fair amount of disorder as well, especially upon arriving home. Entropy is another state function. It doesn't depend on the pathway the system took to reach its current state, so even though we can't measure the entropy of reactants or products directly, we can calculate them. We can also calculate the change in entropy that occurs during a reaction, exactly like we can for the change in enthalpy, by subtracting the sum of the reactant values from the sum of the product values. In other words, the formulas look exactly the same, just substituting S, which for some reason is used to denote entropy for delta HF. Notice that we drop the deltas on the right side of the formula because we know absolute values for entropy of individual reactants and products. We keep the delta on the left because we're calculating the change in entropy that occurs when the reactants rearrange into products. What the heck is this good for? Well we can explain a mysterious thing, which is how reactions occur spontaneously in nature, even though there's no energy given off. Or even they suck heat out of the environment and seem to go up the energy ladder instead of down. Let's try it out with a real reaction here on my desk. This is one of my favorites. This is barium hydroxide octahydrate and this is ammonium chloride. Usually we do chemical reactions in acquiesce solution because most solids don't interact easily, but this pair is an exception to that rule. They react readily in solid form. And this reaction absorbs a lot of heat from the surroundings making everything around it feel cold, now to show you how cold it gets, I'm going to do something here. You're just gonna have to assume you understand what I'm doing. What am I doing, what is happening? Why am I doing this? That's weird Hank, why are you doing that? And then I'm gonna put that on there. So I've got my barium hydroxide in this beaker, now I'm gonna dump the ammonium chloride in and now one of the byproducts of this reaction is ammonia, so I'm gonna have to smell that, but you don't. Oh yeah, look at that slush. I think we've reacted pretty much completely here, and so we should, if all things have gone properly, yep, that's pretty cool, sucked enough heat out of the block of wood to actually freeze it to the beaker. In the world of chemistry, a reaction that proceeds spontaneously, and yet absorbs heat, is really weird. Basically, I have a hard time believing what I just did. So what does entropy have to do with this little freak show? You might think it has something to do with taking the heat from the surroundings to make the system colder, but while that's counterintuitive and cool, that's not all of it. You might also think that it has to do with two solids combining to form a whole bunch more liquids and gasses and that is a big part but still not all. To understand what we just saw a little better, we need to put it all together. Let's start by finding out exactly how much heat it did absorb and what happened to the entropy as well. First we'll find the enthalpy change using Hess' law and the standard enthalpies of formation. We can use the coefficients from the balanced chemical equation to fill in the number of mols for each substance. So then we have to look up a whole bunch of numbers. Remember, you can find tables like this online and probably in the back of your chemistry textbook too. When we plug the standard enthalpies of formation into the formula and do the math, we find that the change in standard enthalpy is plus 166 kilojoules. It's positive which makes sense because the reaction absorbed the thermal energy, enough to create about a half a kilogram of ice, if it had been surrounded by water instead of air and fingers. Next, we'll find the entropy change. Remember, the basic equation is the same. We put in the number of mols from the balanced chemical equation and the standard entropys from a table, and a quick calculation tells us that the change in standard entropy is 594 joules per Kelvin. A positive result means the entropy of the reaction increased meaning the products were more disordered than the reactants. Note that the standard enthalpy is in kilojoules while the standard entropy is in joules per Kelvin. The energy units should match so let's call entropy 0.594 kilojoules per Kelvin. It doesn't look like much right now, but wait, there's more. Those numbers don't explain why the reaction proceeds spontaneously even though it scavenges all that heat from the environment, but Josiah Willard Gibbs, he found a way to explain it and he didn't even mean to. Gibbs was interested in the amount of energy in a system that was available or free to do useful work. Today, we call this Gibbs free energy or sometimes the standard free energy or simply free energy of the system. Like enthalpy and entropy, Gibbs free energy is a state function so it can be calculated the same way. We simply substitute delta G, which stands for Gibbs free energy, for delta H or S. The standard free energy of formation written like this is the change of free energy that occurs when a substance is formed from its elements at a standard state. It's analogous to the standard enthalpy of formation that we use to calculate change in enthalpy. Like enthalpy and entropy, we can't directly measure the free energy change of the whole reaction. So scientists created a baseline by setting the standard free energy change of formation for an element in its most stable form at standard state to zero. The standard free energy change of formation for a compound then, is just the difference between its standard free energy and that baseline. But what if you don't know the standard free energies of formation for the products end reactants? Well they're often listed in tables, but sometimes the ones you need aren't available. Never fear, Willard Gibbs has an app for that. It's actually a formula, but he figured it out. In 1873 Gibbs calculated that at constant pressure and temperature, the change in the standard Gibbs free energy for reaction equals the change in standard enthalpy minus the product of the temperature and the change in standard entropy. In other words, the amount of free energy a reaction makes available to do work depends on two and only two things. The enthalpy change, the amount of heat the reaction transfers and the entropy change, the amount of disorder it creates at a given temperature. So which is more important, the heat transfer or the disorder? Well it depends. A large change in enthalpy can determine the direction of a free energy change even if the entropy changes in the opposite direction and vice versa. If the absolute value of the change in enthalpy is greater than the absolute value of the product of the temperature and the change in entropy, or T delta S, then we say that the reaction is enthalpy-driven. This means that the flow of thermal energy provides most of the free energy in the reaction. On the other hand, if the absolute value of T delta S is greater than the absolute value of the enthalpy change, we call the reaction entropy-driven, meaning increased disorder provides most of the reaction's free energy. Which type was the barium hydroxide reaction? Well, I'm gonna say that the temperature in here is about 25 degrees Celsius or 298.15 Kelvin because I'm awesome like that, I can just tell. When we multiply that by the change in entropy that we calculated, 0.594 kilojoules per Kelvin, we get a value of 177 kilojoules. If we compare that to the change in enthalpy we calculated, 166 kilojoules, it is clear that the T delta S is higher than the delta H, so the reaction is entropy-driven, no surprise there. Even though the reaction absorbed a lot of thermal energy, this phenomenon was dwarfed by the increase in entropy. And this makes sense because the balanced equation goes from three total mols of solids, with their molecules locked in place to one mol of solid, 10 mols of liquid and two mols of gas, this is a massive increase in disorder because in addition to the fact that they are now 13 mols of particles to move around instead of just three, the liquid and gas are particularly good at moving around. So most of those particles are in random motion, no longer stuck in one spot causing a large increase in disorder or entropy. But here's the coolest part, Gibbs formula also tells us whether the reaction is spontaneous or not. We know all systems tend toward the lowest possible energy state whether it's a ball rolling down a hill, elastic springing back into shape or positive and negative ions forming a bond. Delta G is a type of energy, obviously. So it spontaneously approaches the minimum possible level. So if the value for delta G is negative, that is if the free energy decreases, the reaction is spontaneous. Reactions that are able to release free energy don't need external energy to make them proceed and that's the very definition of a spontaneous reaction. So if delta G is positive, the reaction is nonspontaneous, but the reverse reaction is spontaneous. If delta G is zero, the reaction is in an equilibrium state and no discernible change occurs in either direction. So what about the reaction I just did, is it spontaneous at room temperature? Can it occur without energy driving it along? Well yes because we just watched it happen, but let's do the math. Using Gibbs formula and plugging in the numbers that we've calculated so far, we see that the Gibbs free energy for this reaction is negative 11 kilojoules. It is indeed spontaneous because it releases energy instead of requiring it in order to get started. The energy that was produced was used to rearrange the bonds and the reactants to make smaller product molecules to break attractions between molecules and to push some of the particles apart from solid form into liquid and gas form, which increased the entropy of the system. So even though the reaction absorbed a lot of thermal energy it didn't need that energy to make it proceed because the large change in entropy alone, was enough to keep things moving along. So Gibbs formula confirms our earlier results with just one little subtraction.